with a vertical vibration : Advancing (Type ViBav) or On Feet (Type ViBp)

The environmental test chambers for vibration and temperature testing with Advancing (ViBav) or on Feet (ViBp) are widely acclaimed by users:

• because of their ability to adapt to various shakers
• because of their test modes multivalence (hot-cold-humid, hot, cold, hot-cold, hot-cold-humid)
• because of their uniformity with the rest of the CLIMATS environmental test chamber range.

These environmental test chambers, built to customer specifications, are dedicated to combined vibration, temperature and humidity testing.

Test volumes are then optimized according to the geometry, nature, mass and dissipation of the product to be tested, while using a vibratory element.

These chambers are adapted standards. They benefit from CLIMATS expertise, including ventilation, refrigeration machinery, electrical cabinet and SPIRALE system, the foundations of our designs.

The flexibility of the manufacturing process enables to build environmental test chambers :

• equipped with a front-mounted test volume. A table or vibrating pot can be slid under the environmental test chamber.
• on feet. The environmental test chambers are simply positioned above the vibrating pot.

To meet these requirements, our manufacturing process incorporates the drawer principle with a bellows seal between the pot and the environmental test chamber, adapting to a wide range of configurations.

These environmental test chambers can be used in the conventional way.

Climats offers you a wide choice of fittings, including…

Setting up the structure of your chamber

• creation of Customized portholes with the integration of additional portholes in the side panels, ceiling, door and even in the window (diameters from 80 to 200 mm).
• Integration of customer-specific windows, connectors or sensors adapted to your requirements
• Reinforced shelves to increase load per level
• Increased load deposited on the floor of the test area
• Reverse door opening
• 316L stainless steel test cabinet and nikelage evaporator treatment to protect test volume from chemical attack
• Air extractor for air renewal inside the test volume

Make your tests safe

• MINI MAXI electronic temperature safety unit on independent PT100 probe, to secure your tests.
• Safety switch
• Integration of dedicated thermal fuses
• Dimmer for selecting fan speed
• Secure your high-power cables with the 10/16A safety socket
• Air dryer to prevent moisture build-up by sweeping in dry air or nitrogen

To improve the chamber’s environment

• Integration of a buzzer on function or alarm
• Light column
• Integration of a demineralized water reserve for use in wet tests
• Enhanced soundproofing of machinery
• Installation of water filtration cartridges for short-term wet tests
• Replacement of the water-cooled cooling system with a remote air-cooled condenser solution
• Installation of an additional chiller to cool the plant

Develop your tests …

• Relative humidity sensor for measurement or control
• PT100 or thermocouple acquisition card
• Complementary acquisition units
• Development of specific operating modes: control based on the average of several probes, control arrival information via dry contact, START & STOP for control and ventilation during measurement.
• Specific digital communication such as IEEE 488, 0/10v analog control
• Remote panel PC for remote control of your peripherals
• Support for MODBUS communication protocol accessories

• 6658_4000dm3_vib-temp_EN-2020
• 7460_vib-avance-pied_EN-2020
• 7606_cuve-deportee-110dm3_EN-2020_01
• 8115_combine_vibration-climatique_EN-2020
• 8159_1130dm3_stabilite-vibratoire_EN-2020
• 13641_MX_EN_SP_2026